1x Elite Sealed Shift

The 1x Elite Sealed Shift Kit uses a continuous liner that seals the system completely, protecting it against dirt, mud, and other contamination. This system offers the ultimate protection and low-friction performance in three colors for bikes with a rear derailleur or internally geared hub only.

We’ve paired Elite Polished Ultra-Slick inner cables to ensure the best possible performance with our Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability.

• The continuous liner running from the shift lever to the derailleur offers outstanding protection from dirt and debris
• Elite Polished Ultra-Slick cable is paired with a Slick-Lube liner to minimize friction
• Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing
• 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components.

Available in 3 colors

• SCK020Stealth Black

• SCK021White

• SCK022Red

Technology

XEX – lightweight, braided steel strands around a Slick-Lube liner

Sealed, Lubricated
Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud, or anything else that can cause friction. But because the liner runs the entire cable length, Ultra-Slick polished inner cables are used to keep friction to a minimum.

STS-EL – pre-stretched, highly polished, uncoated slick stainless steel spiral-bound cables

Polished Ultra-Slick Stainless Steel
These ultra-slick stainless cables deliver the ultimate low-friction performance. Rather than using a coating, the Elite Ultra-Slick cables are polished to an even higher level than our Pro Slick cables. Compatible with any housing and lubricant, these Elite level cables deliver incredibly accurate, smooth performance.

What’s Included

• 1 2200mm XEX Shift Housing
• 1 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cable
• 1 2225mm Slick-Lube Liner
• 1 LEX-SL 4mm Shift Housing Segments, 300mm
• 2 Open Brass End Caps
• 4 Open Alloy End Caps for 5mm Housing
• 1 Open Alloy End Caps for 4mm Housing
• 1 Pro Indexed Inline Adjusters (4mm/5mm)
• 1 Housing Connectors (4mm/5mm)
• 1 Cable Tip
• 1 Grub Seal
• 1 5G Tube Top
• 1 Rotating Hook

Specifications

• Housing Construction XEX
• Outside Diameter 5.0mm
• Housing Length 3200mm
• Liner Slick-Lub
• Liner Length 2225mm
• Cable Construction STS-EL
• Compatibility SRAM/Shimano Road and Mountain
• Cable Length 2300mm