Chain cleaning tool for rapid and thorough cleaning of cycle chains.
An unloved, dirty, gritty chain makes for a frustrating riding experience. Use our Sprocket Rocket chain cleaning device for a deep, complete clean without having to remove the chain from your bike.

• 88 brushes
• 4 cleaning stages
• 100ml capacity

Instructions:

• Before starting, be sure to lay down protection on the floor, such as newspaper or cloth, to catch any dirty drips.
• Shift gear on bike to smallest rear cog.
• Remove the top of the device by sliding the top section forwards and lifting.
• Place the lower part of your chain in the chain cleaner device, and push down so the chain is seated amongst the bristles and exit sponge.
• Place the upper part of the chain cleaning device over the chain, and clip it into place.
• Attach the handle (slide right to left to affix).
• PourGumchained Remedyinto the device through the 2 small holes on the top, until the lower part of the brushes issubmerged.
• While holding the device by the handle, turn the pedals anticlockwise, to run the chain through the device. Perform this for around 1 minute, or until the chainis clean.
• Remove the device, and wipe the chain with a rag orCrankalicious Cell Foam chain cleaning spongeto dry.
• Repeat steps 4 to 9 if the chainis still dirty.
• Lubricate the chain with CrankaliciousScience Friction Ceramic Lubeto prevent rust and prolong life.